Aim7 IMD-MISTREL V2 Muzzle Brake & Comp
$143.00
Description
Description
Aim7 IMD MK Series Linear Comp
Integral Muzzle Device (IMD) Thread Mount 1.125×28 ALPHA FOR 5/8X24 30CAL BARREL & ALL OTHER CALIBERS
- Material: Made from 17-4 H900 stainless steel, a high-strength and corrosion-resistant material commonly used in firearm components.
- Function: Combines two functionalities:
- Integral brake: Reduces recoil and muzzle rise like a traditional muzzle brake, but machined directly into the mount, not a separate attachment.
- Direct thread mount: Allows for direct attachment of a suppressor (silencer) to the barrel without needing a separate adapter.
- Benefits:
- Blast baffle protection: The integral brake design extends beyond the threads, offering additional shielding for the suppressor’s first baffle, which faces the hot gasses.
- Pinning compatibility: The long “tail” provides a surface area for pinning and securing the mount permanently to the barrel (a legal requirement in some areas).
- Handguard clearance: The tail length ensures compatibility with handguards that might extend slightly beyond the barrel shoulder.
- Seamless aesthetics: The tail diameter matches a typical AR barrel for a cleaner look.
This product offers a single, compact unit that combines a muzzle brake, suppressor mount, and potentially a pinning surface for legal compliance.
Material: 17-4 H900 stainless steel
Overall length: 1.11″
Flange diameter: 1.15″
Weight: 3.3 ounces
External thread: 1.125×28 ALPHA (HUB)
Function:
- Integral muzzle brakes work just like traditional muzzle brakes. They utilize vents, ports, or baffles to redirect propellant gases exiting the barrel.
- This redirection helps to counter recoil and muzzle rise, allowing for faster follow-up shots and improved accuracy during rapid fire.
Benefits:
- Compactness: An integral brake eliminates the need for a separate attachment, resulting in a shorter overall firearm length while maintaining the benefits of a muzzle brake.
- Reduced weight: By eliminating a separate component, the overall weight of the firearm can be slightly reduced.
Aesthetics: Some shooters prefer the cleaner look of an integral brake compared to a separate attachment. - Legality: In some jurisdictions, there are minimum barrel length requirements. An integral brake that extends the barrel length can help a firearm meet these requirements.
Drawbacks:
- Limited options: With an integral brake, you’re stuck with the specific design machined into the barrel. You cannot swap it out for a different type of muzzle device.
- Modification difficulty: If the integral brake is damaged, it can be more difficult and expensive than a replaceable muzzle device.
Applications:
- Integral muzzle brakes are often found on hunting or competition rifles where shooters benefit from reduced recoil and faster follow-up shots.
- They can also be seen on some tactical rifles where compactness and maneuverability are important.
Here are some additional points to consider:
- Integral muzzle brakes can be louder than traditional brakes due to the design being fixed within the barrel.
- An integral brake’s effectiveness depends on the firearm’s specific design and caliber.
I hope this clarifies the concept of integral muzzle brakes for firearms.
Features & Tips:
Material: 6061-T6 Aluminum
Coating: Black Hard Coat Anodized
Compatibility:
– .223, 5.56, .300 Blk, .350 Legend
– Pistol Calibers: Anything .45 ACP and Smaller
– Compatible with popular suppressor attachments
Aim7 1.375X24 (1 3/8X24) BOOSTER HOUSING
This can also be used with the EXPLORR® utility mount series.
The booster housing itself is manufactured from solid, high-temperature corrosion-resistant 17-4 Stainless Steel, and then H900 heat treated to maximize service life and has a lustrous black nitride finish. The outer thread pitch of the housing itself is 1.375×24, a common industry standard for many 1.5″ tube body suppressors. This thread pitch is also known as HUB, universal, and others. Our booster piston springs (replacements available separately), manufactured from 17-7 stainless steel wire, offer excellent resistance to corrosion, superior fatigue properties, and exceptional rigidity and durability. The booster housing piston retainer nut is constructed from 6061 T6 aluminum, with type 3 mil-spec hard coat anodizing. The thread pitch of the booster housing piston retainer nut is 1.125×28, this is the same booster housing piston retainer nut utilized by the Pistol suppressor booster housing assembly.
This booster housing (available for purchase by itself) is a great option for customers who would like to keep a 3-lug interface assembled in a booster housing and would like to simply swap booster housings when changing between fixed barrel and tilt barrel applications. This is also a great option for form 1 builders who need a booster assembly to make their firearm reliably cycle when suppressed.
Additional information
| MUZZLE THREAD PITCH | .40 Cal(9/16x24tpi), .40-.458 Cal (11/16x24tpi), .578x24tpi, 1/2×20 tpi, 223/556 (1/2x28tpi), 30 cal (5/8x24tpi), 458 Socom (5/8x32tpi), 9mm (1/2x28tpi), M14x1LH tpi |
|---|
