AIM7 MAGIK CYCLONE-P & BXM MUZZLE Steel Linear Comp 3.2″

AIM7 MAGIK CYCLONE-P & BXM MUZZLE Steel Linear Comp 3.2″ 1.375×24 HUB Bravo

The AIM7 MAGIK CYCLONE-P BXM Steel Linear Compensator Assembly is a high-strength modular blast-forwarding system engineered for durability, concentric alignment, and broad Bravo/HUB compatibility. Machined from SUS303 stainless steel with a sleek black finish, this complete kit pairs our heavy-duty MAGIK-S outer body with the recoil-taming performance of the Aim7 BXM Muzzle Device and the directional control of the Cyclone-P front cap.

Designed for aggressive platforms and short-barrel builds, this setup directs concussion, blast wave, and expanding gases forward away from the operator while delivering significant recoil mitigation and sacrificial erosion protection.

Key System Features

• Aim7 BXM Recoil Management: Solid 4140 steel brake featuring an advanced graduated port layout that slashes felt recoil and muzzle climb without requiring timing or shims.
• Sacrificial Baffle Protection: The internal BXM core serves as a sacrificial barrier, shielding outer components and Bravo interfaces from harsh gas jet erosion.
• Cyclone-P Blast Control: CNC-machined front cap incorporates an internal back cone design that actively influences flash and channels blast forward through radial vents.
• Bravo / HUB Standard: Standardized on the 1.375×24 (1-3/8×24) Bravo thread pattern for modular interchangeability.
• High-Pressure & Short-Barrel Rated: Engineered for hard use; rated for barrel lengths 7.5″ and longer across 5.56 / .223, .300 BLK, .308, 9mm, and similar high-pressure calibers.

System Specifications

• Overall Length: 3.2″ (fully assembled with BXM brake & front cap)
• Outer Diameter (OD): 1.55″
• Tube Wall Thickness: 0.11″
• Thread Interface: 1.375×24 (1-3/8×24) Bravo / HUB Standard
• Front Cap Bore Clearance: .491″
• Total Assembled Weight: Approx. 11.0 oz (SUS303 Tube: 7.5 oz | BXM Brake: 3.4–3.6 oz)
• Materials & Finish: SUS303 Stainless Steel Tube (Black Finish) | 4140 Steel Muzzle Brake (QPQ Satin Nitride) | 6061 Aluminum Cyclone-P Cap (Black Anodized)

Component Breakdown

1. MAGIK-S Outer Steel Body: Machined from solid SUS303 stainless steel with heavy 0.11″ wall thickness for superior heat capacity and structural rigidity.
   Specs: 1.55″ OD | 1.375×24 Bravo Internal Threading | Weight: 7.5 oz.
2. Aim7 BXM Muzzle Device & Recoil Brake: Solid 4140 steel brake featuring no-timing graduated ports and outer Bravo hub threads.
   Specs: 1.30″ OAL | Weight: 3.6 oz (1/2×28) / 3.4 oz (5/8×24) | Available in 1/2×28 TPI (.223 / 5.56) and 5/8×24 TPI (.30 Cal / 7.62 / .308 / 9mm). Peel washer included.
3. AIM7 Bravo Cyclone-P Front Cap: Precision-machined 6061 aluminum front cap engineered with an internal back cone profile and radial forward vents.
   Specs: 0.897″ Thickness | 1.55″ OD | .491″ Bore Clearance | Black Anodized.

BXM Technical Reference

Important Disclosures & Compliance

• Policy & Classification Notice: THIS ITEM IS NOT A SILENCER, SUPPRESSOR, OR NFA DEVICE. This product is strictly an open, unbaffled muzzle brake and linear blast compensator intended solely for recoil mitigation and forward blast deflection. It contains zero dampening material, acoustic baffling, or sound-diminishing features, and does not reduce or suppress the sound report of a firearm.
• Safety & Installation: Verify caliber clearance, bore concentricity, and thread pitch prior to use. Installation by a certified gunsmith or armorer is strongly recommended. Ensure your firearm is unloaded, chamber clear, and pointed in a safe direction prior to installation or servicing.
• Legal Compliance: The buyer assumes full responsibility for complying with all applicable local, state, and federal firearms laws and regulations.
• Proposition 65 Warning: This product may contain trace chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.